Rinse phase
When switched off, the analyzer box checks whether flue gases are
still in the sensors. The sensors are rinsed with fresh air, if this
should be necessary. The duration of the rinse phase depends on
the gas concentration in the sensors.
> Press [
].
-
The rinse phase starts.
-
The flue gas analyzer switches off. It is normal for the fan of the
analyzer box to run for a short time.
免责声明:文章仅供学习和交流,如涉及作品版权问题需要我方删除,请联系我们,我们会在第一时间进行处理。